sheet plate flanges pipe tube tubing flange coil strip pipie nipple fasteners bolts nuts screws fittings elbow pipefitting sheetmetal metal supply
sheet plate flanges pipe tube tubing flange coil strip pipie nipple fasteners bolts nuts screws fittings elbow pipefitting sheetmetal metal supply
  Ferrous Steels
  Non Ferrous Steels
  Others

Non Ferrous Steels

B 209/ B 209 M ALUMINUM AND ALUMINUM ALLOY SHEET AND PLATE. GRADE ALLOY 1016 , 1060 TEMPER 0 , ALLOY 6061 , 6063 TEMPER H 12 H 14 ,T4,T6
B 210 / B 210M ALUMINUM AND ALUMINUM ALLOY DRAWN SEAMLESS TUBES  GRADE  1060 ,3003, 6061 , 6063 TEMPER O  , H12 , H 14 , T4 , T6 ,FLARING TEST - FOR GENERAL PURPOSE AND PRESSURE APPLICATION.
B 211/ B 211M ALUMINUM AND ALUMINUM ALLOY ROD , BAR AND WIRE - COLD FINISHED BAR , GRADE 1060 ,1100 ,6061 TEMPER O,H12 , H 14 , T4 , T6 - STRESS CORROSION RESISTANCE.
B 221 / B 221M ALUMINUM AND ALUMINUM ALLOY EXTRUDED BARS , RODA , AND PROFILES-GRADE ALLOY 1060 , 6061 , 6063 TEMPER T3, O,H12 , H 14 , T4 , T6.
B 241 /B 241M ALUMINUM AND ALUMINUM ALLOY SEAMLESS PIPE AND SEAMLESS EXTRUDED TUBE. - FOR PRESSURE APPLICATION ,  ALLOY 6061 , 6063 TEMPER T6 AND T5 , ALLOY 1060 TEMPER 0 , H12 , H 14 , T4 - STREE CORROSION RESISTED.
B 171/B 171M COPPER ALLOY PLATE AND SHEET FOR PRESSURE VESSEL , CONDENSER AND HEAT EXCHANGERS -  UNS NO C 46400 , C 70600 , C 71500 - NAVAL BRASS , 90-10 COPPER NICKEL , 70-30 COPPER NICKEL, TEMPER M20 , O25.
B 248/B 248M GENERAL REQUIREMENT FOR WROUGHT COPPER AND COPPER ALLOY PLATE , SHEET , STRIP AND ROLLED BAR,
B 151/B 151M COPPER -NICKEL -ZINC ALLOY (NICKEL SILVER ) AND COPPER NICKEL ROD AND BAR - UNS NO C70600 ,C76400,C71520 TEMPER H01 , H04 -O60 ,GRAIN SIZE,
B 249 / B 249M GENERAL REQUIREMENT FOR WROUGHT COPPER AND COPPER ALLOY ROD , BAR , SHAPES , AND FORGING  - TOLERANCES IN DIA , LENGTH , ROUND AND SQUARE BAR , ANGLE.
B 111/ B 111M COPPER AND COPPER ALOY SEAMLESS CONDENSER TUBES AND FERRULE STOCK -C10100 OFE Oxygen-free electronicC10200 OFA Oxygen-free without residual deoxidants,C10300 . . . Oxygen-free, extra low phosphorus,C10800 . . . Oxygen-free, low phosphorus,C12000 DLPA Phosphorized, low residual phosphorus,C12200 DHPA Phosphorized, high residual phosphorus,C14200 DPAA Phosphorized, arsenical,C19200 . . . Phosphorized, 1 % iron,C23000 . . . Red Brass,C28000 . . . Muntz Metal,C44300 . . . Admiralty Metals, B, C, and D,C44400,C44500,C60800 . . . Aluminum Bronze,C61300 . ,C61400 . . . Aluminum Bronze, D,C68700 . . . Aluminum Brass, B,C70400 . . . 95-5 Copper-Nickel,C70600 . . . 90-10 Copper-Nickel, GRAIN SIZE AND ANNEALED TEMPER , RESIDUAL STRESS TEST ,LIGHT DRAWN , HARD DRAWN ,STRESS RELIEVED ,EDDY CURRENT TESTED , HYDROTESTED ,FLATTENING AND EXPANSION TEST ,
B 251 / B 251M GENERAL REQUIREMENT FOR WROUGHT SEAMLESS COPPER AND COPPER ALLOY TUBE.
B 466 / B 466M SEAMLESS COPPER - NICKEL PIPE AND TUBE - The alloys involved are copperalloys UNS Nos. C70400, C70600, C70620, C71000, C71500,
C71520, and C72200 - SUITABLE FOR GENERAL ENGINEERING PURPOSE - TEMPER-O60 ,H55 ,H80 - SOFT ANNEALED , LIGHT DRAWN ,HARD DRAWN , EDDY CURRENT TEST AND HYDROTEST- FLATTENING TEST .
B 127 / B 127M NICKEL - COPPER ALLOY UNS NO 4400 PLATE , SHEET , STRIP  - DEEP DRAWING AND SPINNING QUALITY SHEET AND STRIP , ANNEALED , AS ROLLED , HARD , QUARTER HARD , HALF HARD , SKIN HARD , 
B 162 /B 162M NICKEL  PLATE , SHEET , STRIP - ROLLED NICKEL UNS NO 2200 AND LOW CARBON NICKEL 2201 , ANNEALED , AS ROLLED , HARD , QUARTER HARD , HALF HARD , SKIN HARD , 
B 168 / B 168M NICKEL - CHROMIUM -IRON ALLOYS - UNS NO 6600 , 6601 , 6690 , 6025 , 6045  AND NICKEL -CHROMIUM-COBALT-MOLYBDNUMALLOY UNS NO 6617 , PLATE , SHEET  AND STRIP.-GRAIN SIZE , AND HARDNESS FOR COLD ROLLED , DEEP DRAWING AND SPINNING QUALITY , HOT ROLLED , ANNEALED AND PICKLED.
B 409 / B 409M NICKLEL - IRON - CHROMIUM ALLOY PLATE , SHEET AND STRIP - HOT ROLLED , COLD ROLLED PLATE , UNS NO 8120 , 8800 , 8810 , 8811 - 800H , 8890 , ANNEALED DEEP DRAWING AND SPINNING QUALITY , GRAIN SIZE , 
B 424 / B 424M NI-FE-CR-MO-CU ALLOY (UNS NO 8825 AND UNS NO 8821) PLATE , SHEET , STRIP , HOT ROLLED AND COLD ROLLED.
B 443 / B 443M NICKEL-CHROMIUM-MOLYBDENUM-COLUMBIUM ALLOY (UNS NO 6625) PLATE , SHEET , STRIP - GRADE 1 , GRADE 2 - ANNEALED AND SOLUTION ANNEALED - UNS NO. 6219 , 
B 463 / B 463M UNS NO 8020 , UNS NO 8026 , UNS NO 8024 ALLOY PLATE , SHEET , STRIP - ALLOY 20 ANNEALED PLATE 
B 575 / B 575M Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon ,Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-, Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, andStrip , GRADE plate, sheet, and strip oflow-carbon nickel-chromium-molybdenum alloys (UNSN10276, N06022, N06455, N06035, UNS N06058, UNS
N06059)*, low-carbon nickel-chromium-molybdenum-copperalloy (UNS N06200), low-carbon nickel-chromiummolybdenum-
tantalum alloy (UNS N06210), and low-carbonnickel-chromium-molybdenum-tungsten alloy (UNS N06686) FOR USE IN GENERAL CORROSIVE SERVICE.
B 625 / B 625M UNS NO 8904 , UNS NO 8925 , UNS NO 8031 , UNS NO 8932 , UNS NO 8926 AND R 20033 PLATE , SHEET , STRIP , ANNEALED TEMPER. 
B 160 / B 160M NICKEL ROD AND BAR - UNS NO 2200 , SQUARE , RECTANGULAR , ROUND- COLD WORKED , HOT WORKED , ANNEALED , UNS NO 2201 , 2211.
B 164 / B 164M NICKEL - COPPER ALLOY ROD , BAR AND WIRE - UNS NO 4400 , 4405  - COLD WORKED , HOT WORKED , STREE RELIEVED , ROUND , SQUARE , RECTAGULAR , HEXAGONAL ROD 
B 166 / B 166M NICKEL - CHROMIUM - IRON ALLOY (UNS NO 6600 , 6601 , 6603 , 6690 , 6025AND 6045) AND NICKEL - CHRIMIUM  COBALT MOLY ALLOY         ( UNS NO 6617 ROD , BAR , WIRE , HOT WORKED , COLD WORKED , ANNEALED 
B 408 / B 408M NICKEL - IRON -CHROMIUM ALLOY ROD AND BAR  - GRADE UNS N08120, UNS N08800,UNS N08810, UNS N08811*, and UNS N08890 in the form ofhot-worked and cold-worked rod and bar. Alloy UNS N08800is normally employed in service temperatures up to andincluding 1100°F (593°C). Alloys UNS N08120, UNSN08810, UNS N08811, and UNS N08890 are normally employedin service temperatures above 1100°F (593°C) whereresistance to creep and rupture is required, and they areannealed to develop controlled grain size for optimum properties in this temperature range.
B 425 /B 425M NI-FE-CR-MO-CUALLOY (UNS NO 8825 AND UNS NO 8821 ) ROD BAR , HOT FINISHED , COLD FINISHED ROUNS , SQUARE , HEXAGON , RECTANGLE.
B 446 / B 446M Nickel-chromiummolybdenum-columbium (UNS N06625), nickel-chromiummolybdenum-silicon alloy (UNS N06219), and Nickel-
Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* in the form of hot-worked rod and bar and cold-worked rod - UNS NO 6625 GRADE 1 AND 2 - ANNEALED AND SOLUTION ANNEALED. 
B 473 / B 473M UNS N08020, UNS N08026,and UNS N08024 bar and wire other than required for reforging. 
B 564 / B 564M NICKEL ALLOY FORGING OF UNSN02200, Ni-Cu alloy UNS N04400, Ni-Cr-Fe alloys UNSN06600, UNS N06603, and UNS N06690, Ni-Cr-Mo-Nb alloyUNS N06625, Ni-Cr-Mo-Si alloy UNS N06219, low-carbonNi-Mo-Cr alloys UNS N10276 and UNS N06022, Ni-Cr-Mo-W alloy UNS N06110, low-carbon Ni-Cr-Mo-W alloyUNS N06686, Ni-Fe-Cr-Mo-Cu alloy UNS N08825, Fe-Ni-Cr-Mo-N alloy UNS N08367, low-carbon Ni-Cr-Mo alloys UNSN06035, UNS N06058, and UNS N06059, low carbon Ni-Cr-Mo-Cu alloy UNS N06200, Ni-Mo-Cr-Fe alloy UNS N10242,Ni-Mo alloys UNS N10665 and UNS N10675, low-carbonNi-Fe-Cr-Mo-Cu alloy UNS N08031, Ni-Cr-W-Mo alloy UNSN06230, Ni-Cr-Co-Mo alloy UNS N06617, Ni-Co-Cr-Si alloyUNS N12160, Ni-Fe-Cr alloys, Ni-Mo alloy UNS N10629,Ni-Cr-Fe-Al alloy UNS N06025, Ni-Cr-Fe-Si alloy UNSN06045, Low-Carbon Ni-Mo-Cr-Ta alloy UNS N06210, Ni-Mo-Cr-Fe alloy UNS N10624, and low-carbon Cr-Ni-Fe-N alloy UNS R20033. The nickel-iron-chromium alloys are UNS N08120,UNS N08800, UNS N08810, and UNS N08811. Alloy UNSN08800 is normally employed in service temperatures up toand including 1100°F (593°C). Alloys UNS N08810, N08120,and UNS N08811 are normally employed in service temperaturesabove 1100°F where resistance to creep and rupture isrequired, and are annealed to develop controlled grain size foroptimum properties in this temperature range. - FORGED FITTINGS  LIKE ELBOW , TEE , CONC. COUPLNG  , ECC COUPLING , STREET ELBOW , RED ELBOW , HALF / FULL COUPLING , SWAGES , PLUG ROUND & SQUARE HEADED THREADED NPT AND BSPT.
B 574 / B 574M This specification covers rod of low-carbon nickelchromium-molybdenum alloys (UNS N10276, N06022,N06035, N06455, N06058, and N06059)*, low-carbon nickelmolybdenum-chromium-tantalum (UNS N06210), low-carbonnickel-chromium-molybdenum-copper alloy (UNS N06200),and low-carbon nickel-chromium-molybdenum-tungsten(UNS N06686) -FORGED FITTINGS  LIKE ELBOW , TEE , CONC. COUPLNG  , ECC COUPLING , STREET ELBOW , RED ELBOW , HALF / FULL COUPLING , SWAGES , PLUG ROUND & SQUARE HEADED , HASTELLOY FITTINGS , THREADED NPT AND BSPT.
B 649 / B 649M Specification covers nickel-iron-chromiummolybdenum-copper-nitrogen alloys (UNS N08925, UNSN08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-Nlow-carbon alloy (UNS R20033) bar and wire.UNS N08904, previously in this specification
were recognized as stainless steels, because thosegrades have iron as the largest element by mass percent. Suchgrades are under the oversight of ASTM Committee A01 andits subcommittees. The products of N08904 previously coveredin this specification are now covered by Specifications A 479/A 479M and A 484/A 484M.
B161/ B 161M NICKEL SEAMLESS PIPE AND TUBE OF UNS NO 2200 , 2201  - COLD WORKED  - ANNEALED AND STREE RELIEVED  , 
B 163 / B 163M SEAMLESS NICKEL AND NICKEL ALLOY CONDENSER AND HEAT EXCHANGER TUBES OF UNS NO 2200 , 2201, 4400 MONEL ,6603,6696,6601,6600 INCONEL 600 , 8120,8800,8811, INCONAL 800 , 800 HT , 6025 , 8801 IN ANNEALED AND STREE RELEIVED CONDITION . GRAIN SIZE , FLARING TEST.
B 165 / B 165M NICKEL - COPPER ALLOY  UNS  NO 4400 , MONEL SEAMLESS PIPE AND TUBES  - IN ANNEALED AND STREE RELIEVED CONDITION , HYDROTESTED AT 17500 , 16500 , 21200 PSI .
B 167 /  B 167M Nickel-chromium-iron alloys(UNS N06600, N06601, N06603, N06690, N06693, N06025,and N06045)* and nickel-chromium-cobalt-molybdenum alloy(UNS N06617) in cold-worked annealed, hot-worked annealed,and hot-finished seamless pipe and tube intended for general corrosion resistant and heat resistant applications. HOT WORKED , COLD WORKED , ANNEALED AND STRESS RELEIVED 
B 407 / B 407M NICKEL -CR-FE ALLOY SEAMLESS PIPE AND TUBE , UNS NO N08120, UNS N08800,UNS N08801, UNS N08810, UNS N08811, UNS N08890,  andUNS N06811 in the form of cold-worked and hot-finishedannealed seamless pipe and tube. Alloys  UNS N08800 andUNS N06811 are normally employed in service temperaturesup to and including 1100°F (593°C). Alloys UNS N08120,UNS N08810, UNS N08811, and UNS N08890 are normallyemployed in service temperatures above 1100°F (593°C)where resistance to creep and rupture is required, and they areannealed to develop controlled grain size for optimum propertiesin this temperature range. , INCONEL , MONEL , 800 HT ETC. IN HOT WORKED , COLD WORKED , HOT FINISHED CONDITION
B 423 / B 423M NICKEL -IRON- CHROMIUM - MOLY - COPPER ALLOY UNS NO 8825 AND 8221 SEAMLESS PIPE AND TUBES  FOR GENERAL CORROSIVE SERVICE.
B 444 /B 444M Nickel-chromiummolybdenum-columbium alloys (UNS N06625 and UNSN06852) and nickel-chromium-molybdenum-silicon alloy
(UNS N06219) in the form of cold-worked seamless pipe andtube. The general requirements for pipe and tube are covered
by Specification B 829. GRADE 1 AND GRADE 2 OF ANNEALED AND SOLUTION ANNEALED CONDITION .
B 462 / B 462M Forged or rolled UNSN06030, UNS N06035, UNS N06022, UNS N06200, UNSN06059, UNS N06686, UNS N08020, UNS N08024, UNS
N08026, UNS N08367, UNS N10276, UNS N10665, UNSN10675, UNS N10629, UNS N08031, UNS N06045, UNSN06025, and UNS R20033* pipe flanges, forged fittings, andvalves and parts intended for corrosive high-temperature service. INCONEL , ALLOY 20 , C276 , GRADES ., FLANGES 
B 464 / B 464M Welded UNS N08020,N08024, and N08026 alloy pipe for general corrosion-resisting and low- or high-temperature service. ALLOY 20 WEDLED PIPE  TESTED FLATTENING AND HYDRO TEST , NDT , GUIDED BEND TEST.
B 468 / B 468M Welded UNS N08020,N08024, and N08026 alloy boiler, heat exchanger, and condenser tubes for general corrosion-resisting and low- or hightemperature service, ALLOY 20 TUBES DULY FLATTENING , HYDRO , NDT ,FLARING TESTED.
B 514 / B 514  Nickel-iron-chromium alloys in the form of welded, cold-worked, and annealed pipe for general corrosive service and heat-resisting applications. These products are furnished in three alloys: UNS N08120, UNS N08800, and UNS N08810.* Alloy UNS N08800 is employed
normally in service temperatures up to and including 1100°F (593°C). Alloys UNS N08120 and UNS N08810 are employed normally in service temperatures above 1100°F where resistance to creep and rupture is required, and are annealed to develop controlled grain size for optimum properties in this temperature range - INCONEL 800 , 800 HT  - GRAIN SIZE - ANNEALED CONDITION.
B 515 / B 515M Welded UNS N08120, UNS N08800, UNS N08810 and UNS N08811* alloy boiler, heat exchanger, and condenser tubes for general corrosion resisting and low or high-temperature service. - INCONEL 800 , 800 H TUBES - HYDROTEST LEAK TEST , ELECTRIC TEST - ANNEALED CONDITION.
B 516 / B 516M welded UNS N06600 , N06603, N06025, and N06045 alloy boiler, heat exchanger, and condenser tubes for general corrosion resisting and low or high-temperature service. - INCONEL 600 TUBES , NDT , ELECTRIC TEST , LEAK TEST .
B 517 / B 517M Welded, cold-worked, and annealed nickel-chromium-iron alloy (UNS N06600, N06603, N06025, and N06045) pipe for general corrosive service and heat-resisting applications. - INCONEL 600 PIPE. 
B 619 / B 619M Welded pipe of nickel and n+B82ickel-cobalt alloys (UNS N10001; UNS N10242; UNS N10665; UNS N12160; UNS N10624; UNS N10629; UNS N10675; UNS N10276; UNS N06455; UNS N06007; UNS N06975; UNS N08320; UNS N06002; UNS N06022; UNS
N06035; UNS N06058; UNS N06059; UNS N06200; UNS N06985; UNS N06030; UNS R30556; UNS N08031; UNS N06230; UNS N06686; UNS N06210; and UNS R20033 - HATELOY  C 276 PIPE.
B 622 / B 622M Seamless pipe and tube of nickel and nickel-cobalt alloys (UNS N10001, UNS N10242,UNS N10665, UNS N12160, UNS N10675, UNS N10276,UNS N06455, UNS N06007, UNS N08320, UNS N06975,UNS N06002, UNS N06985, UNS N06022, UNS N06035,
UNS N08135, UNS N06255, UNS N06058, UNS N06059,UNS N06200, UNS N06030, UNS N08031, UNS R30556,UNS N08535, UNS N06250, UNS N06060, UNS N06230,UNS N06686, UNS N10629, UNS N06210, UNS N10624, and UNS R20033).
B 677 / B 677M This specification covers UNS N08904, UNS N08925, and UNS N08926 seamless, cold-worked or hot-finished pipe and tube intended for general corrosive service. - 904 L PIPE .
B 704 / B 704M Welded UNS N06625, UNS N06219 and UNS N08825 alloy boiler, heat exchanger, and condenser tubes for general corrosion resisting and low or high-temperature service.  - GRADE 1 AND GRADE 2  - ANNEALED AND SOLUTION ANNEALED CONDITION  - CLASS 1 AND 2
B 705 / B 705M Welded UNS N06625,UNS N06219* and UNS N08825* pipe in the annealed condition (temper) for general corrosion applications.         GRADE 1 AND 2 - ANNEALED AND SOLUTION ANNEALED CONDITION.
B 729 / B 729M UNS N08020, UNS N08026,and UNS N08024 seamless, cold-worked or hot finished pipe and tube intended for general corrosive service. , ALLOY 20 PIPE.
B 366 / B 366M  FACTORY MADE WROUGHT NICKEL AND NICKEL ALLOY FITTINGS - LIKE 90 DEG ELBOW LR , SR , 45 DEG ELBOW LR , SR , EQUAL TEE , UNEQUAL TEE , REDUCER . ECC REDUCER , 90 DEG LONG RADIUS BENDS OF R=3D.5D,6D,7D,10D AND HIGHER THAN THAT .. , AND HAVING AL TYPE OF NON FERROUS GRADES , LIKE MONEL , INCONAL , C 276 , HASTELOY , CR 904L , CR BH2 , CR BH3 , CR HB , CRNICMC , INCONEL 800 , 800HT  AS PER STD ASME B 16.9 , B 16.28 , MSS SP 75 ETC .
B 348 / B 348M TITANIUM AND TITANIUM ALLOY BARS AND BILLETS OF GRADE 1 , 2 3, 4, 5 , 6,11 ,22 ETC - ANNEALED.
B 861 /B 861M TITANIUM AND TITANIUM ALLOY SEAMLESS TUBES  OF GRADE 1 , 2 3, 4, 5 , 6,11 ,22 ETC - ANNEALED.
B 862 / B 862M TITANIUM AND TITANIUM ALLOY WELDED PIPE  OF GRADE 1 , 2 3, 4, 5 , 6,11 ,22 ETC - ANNEALED.

 

   

Home | About Us | Products | Quality | Inquiry Form | Contact