exporter of all UNS 32750 Duplex Stainless Steel Pipes Tubes | Suppliers UNS 32750 Duplex Stainless Steel Pipes Tubes Exporters Traders and Manufacturers of Seamless Welded Erw Fabricated Pipes Tubes Tubing India

stainless steel pipes, stainless steel tubes, steel flanges, steel butt weldings, steel pipe fittings
UNS 32750 Duplex Stainless Steel Pipes Tubes
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
sheet plate flanges pipe tube tubing flange coil strip pipie nipple fasteners bolts nuts screws fittings elbow pipefitting sheetmetal metal supply UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing sheet plate flanges pipe tube tubing flange coil strip pipie nipple fasteners bolts nuts screws fittings elbow pipefitting sheetmetal metal supply
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing

UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing

UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing


UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing

 

UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing

Suppliers Exporters Traders Manufacturers India

Suppliers Exporters Traders Manufacturers India

Suppliers Exporters Traders Manufacturers India

Stainless & Duplex Steel
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
Steel Tubes India is a highly acclaimed manufacturer and exporter of UNS 32750 Duplex Stainless Steel Pipes Tubes | Suppliers UNS 32750 Duplex Stainless Steel Pipes Tubes Exporters UNS 32750 Duplex Stainless Steel Pipes Tubes Traders and Manufacturers of UNS 32750 Duplex Stainless Steel Pipes Tubes India
We Export : Western Australia , Queensland, New South Wales, South Australia, Victoria, Australian Capital Territory, Tasmania, Northern Territory, Ontario, British Columbia, Yukon Territory, Alberta, Manitoba, Saskatchewan, Newfoundland, Prince Edward Island, New Brunswick, Nova Scotia, Eastern Cape, Gauteng, Kwazulu-Natal, Western Cape, England, Scotland, Wales, Northern Ireland, Lagos, Abuja Capital Territory, Vadodara, Mumbai, Chennai, New Delhi, Mahape, Gurgaon, Noida, Bangalore, Coimbatore, Cochin, Ash Sharqiyah, Ar Riyad, Makkah, Dhahran , Riyadh, Jiddah, Jeddah, Masqat, Kwazulu-Natal, Gauteng, Western Cape, Free State, Eastern Cape, Alberta, Saskatchewan, British Columbia, Newfoundland, New Brunswick, Manitoba, Ontario, Nova Scotia, Quebec, Calgary, Edmonton, Vancouver, Toronto, Birmingham, Brentford, Manchester, Bristol, Sheffield, Milton Keynes, London, Poplar, Edinburgh, Thames Ditton
Send Enquiry

Stainless Steel Pipes & Tubes

Grades: Type 304 | Type 304L | Type 304H | Type 316 | Type 316L | Type 316H | Type 317L | Type 321 | Type 347  | Type 410 | Type 904L | UNS 32750 Duplex |

UNS 32750 Super Duplex Stainless Steel Pipes and Tubes

Super Duplex Stainless Steel is a highly alloyed, good performance Duplex steel with a pitting resistance. Super Duplex offers good resistance to pitting and crevice corrosion. Super Duplex is suited for use in aggressive environments. Super Duplex Stainless has good resistance to stress corrosion cracking in chloride and sour environments. Super Duplex has good resistance to erosion corrosion and corrosion fatigue.

Super Duplex stainless like Duplex, is a mixed microstructure of austenite and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades. The main difference is that Super duplex has a higher Molybdenum and Chromium content which gives the material greater corrosion resistance.

Super Duplex has the same benefits as its counterpart - it has lower production costs when compared with similar ferritic and austenitic grades and due to the materials increased tensile and yield strength, in many cases this gives the purchaser the welcomed option of purchasing smaller thicknesses without the need to compromise on quality and performance. 

Benefits of UNS32750 Super Duplex Stainless Steel

  • Improved corrosion resistance in comparison to Duplex
  • Greater tensile and yield strength
  • Good ductility and toughness
  • Good stress corrosion cracking resistance (SSC)
  • Opportunity for purchases to reduce their material costs without compromising on quality

General Properties

Alloy 2507 is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment. The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity and a low coefficient of thermal expansion. The high chromium, molybdenum, and nitrogen levels provide excellent resistance to pitting, crevice, and general corrosion.

The impact strength is also high. Alloy 2507 is not recommended for applications which require long exposures to temperatures above 5700F because of the risk of a reduction in toughness.
Send Enquiry

Applications

  • Oil and gas industry equipment
  • Offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, injection and ballast water systems
  • Chemical process industries, heat exchangers, vessels, and piping
  • Desalination plants, high pressure RO-plant and seawater piping
  • Mechanical and structural components, high strength, corrosion-resistant parts
  • Power industry FGD systems, utility and industrial scrubber systems, absorber towers, ducting, and piping

Standards
ASTM/ASME .......... A240 - UNS S32750
EURONORM............ 1.4410 - X2 Cr Ni MoN 25.7.4
AFNOR.................... Z3 CN 25.06 Az

Corrosion Resistance
General Corrosion
The high chromium and molybdenum content of 2507 makes it extremely resistant to uniform corrosion by organic acids like formic and acetic acid. 2507 also provides excellent resistance to inorganic acids, especially those containing chlorides.
In dilute sulfuric acid contaminated with chloride ions, 2507 has better corrosion resistance than 904L, which is a highly alloyed austenitic steel grade specially designed to resist pure sulfuric acid.

Stainless steel of type 316L (2.5%Mo) cannot be used in hydrochloric acid due to the risk of localized and uniform corrosion. However, 2507 can be used in dilute hydrochloric acid. Pitting need not be a risk in the zone below the borderline in this figure, but crevices must be avoided.

Isocorrosion curves, 0.1 mm/year, in sulfuric acid 
with an addition of 2000 ppm chloride ions

Isocorrosion curves, 0.1 mm/year, in hydrochloric acid. 
Broken line curve represents the boiling point

Critical Pitting Temperature (CPT) range for 
various alloys in 1M NACl

Critical Crevice Corrosion Temperature (CCT)
for various alloys in 10% FeCl3

Intergranural Corrosion 
2507's low carbon content greatly lowers the risk of carbide precipitation at the grain boundaries during heat treatment; therefore, the alloy is highly resistant to carbide-related intergranular corrosion.
Stress Corrosion Cracking
The duplex structure of 2507 provides excellent resistance to chloride stress corrosion cracking (SCC). Because of its higher alloy content, 2507 is superior to 2205 in corrosion resistance and strength. 2507 is especially useful in offshore oil and gas applications and in wells with either naturally high brine levels or where brine has been injected to enhance recovery.
Pitting Corrosion 
Different testing methods can be used to establish the pitting resistance of steels in chloride-containing solutions. The data above were measured by an electrochemical technique based on ASTM G 61. The critical pitting temperatures (CPT) of several high-performance steels in a 1M sodium chloride solution were determined. The results illustrate the excellent resistance of 2507 to pitting corrosion. The normal data spread for each grade is indicated by the dark gray portion of the bar.

Send Enquiry

Crevice Corrosion
The presence of crevices, almost unavoidable in practical constructions and operations, makes stainless steels more susceptable to corrosion in chloride enviroments. 2507 is highly resistant to crevice corrosion. The critical crevice corrosion temperatures of 2507 and several other high-performance stainless steels are shown above.

Chemical Analysis
Typical values (Weight %)

C Cr Ni Mo N Others
0.020 25 7 4.0 .27 S=0.001
PREN = [Cr%] + 3.3 [Mo%] + 16 [N%] ≥ 40

Mechanical Properties
Mechanical and Physical Properties 
2507 combines high tensile and impact strength with a low coefficient of thermal expansion and high thermal conductivity. These properties are suitable for many structural and mechanical components. The low, ambient, and elevated temperature mechanical properties of 2507 sheet and plate are shown below. All of the test data shown are for samples in the annealed and quenched condition.
2507 is not recommended for applications which require long exposures to temperatures in excess of 5700F because of the increased risk of a reduction in toughness. The data listed here are typical for wrought products and should not be regarded as a maximum or minimum value unless specifically stated.
Mechanical Properties

Ultimate Tensile Strength, ksi 116 min.
0.2% Offset Yield Strength 0.2%, ksi 80 min.
0.1% Offset Yield Strength 0.2%, ksi 91 min.
Elongation in 2 inches, % 15 min.
Hardness Rockwell C 32 max.
Impact Energy, ft.-lbs. 74 min.

Low Temperature Impact Properties

Temperature 0F RT 34 -4 -40
Ft.-lbs. 162 162 155 140
Temperature 0F -76 -112 -148 -320
Ft.-lbs. 110 44 30 7
Send Enquiry

Elevated Temperature Tensile Properties

Temperature 0F 68 212 302 392 482
0.2% Offset Yield Strength, ksi 80 65 61 58 55
Ultimate Tensile Strength, ksi 116 101 98 95 94

Physical Properties

Density lb/in3 0.28
Modulus of Elasticity psi x 106 29
Coefficient of Thermal Expansion 
68-2120F/0F
x10-6/0F 7.2
Thermal Conductivity Btu/h ft 0F 8.7
Heat Capacity Btu/lb/0F 0.12
Electrical Resistivity W-in x 10-6 31.5
Send Enquiry

Processing
Hot forming
2507 should be hot worked between 18750F and 22500F. This should be followed by a solution anneal at 19250F minimum and a rapid air or water quench.
Cold Forming 
Most of the common stainless steel forming methods can be used for cold working 2507. The alloy has a higher yield strength and lower ductility than the austenitic steels so fabricators may find that higher forming forces, increased radius of bending, and increased allowance for springback are necessary. Deep drawing, stretch forming, and similar processes are more difficult to perform on 2507 than on an austenitic stainless steel. When forming requires more than 10% cold deformation, a solution anneal and quench are recommended.
Heat Treatment
2507 should be solution annealed and quenched after either hot or cold forming. Solution annealing should be done at a minimum of 19250F. Annealing should be followed immediately by a rapid air or water quench. To obtain maximum corrosion resistance, heat treated products should be pickled and rinsed.

Welding
2507 possesses good weldability and can be joined to itself or other materials by shielded metal arc welding (SMAW), gas tungsten arc welding (GTAW), plasma arc welding (PAW), flux cored wire (FCW), or submerged arc welding (SAW). 2507/P100 filler metal is suggested when welding 2507 because it will produce the appropriate duplex weld structure.

Preheating of 2507 is not necessary except to prevent condensation on cold metal. The interpass weld temperature should not exceed 3000F or the weld integrity can be adversely affected. The root should be shielded with argon or 90% N2/10% H2 purging gas for maximum corrosion resistance. The latter provides better corrosion resistance.

If welding is to be done on only one surface and post-weld cleaning is not possible, GTAW is suggested for root passes. GTAW or PAW should not be done without a filler metal unless post-weld cleanup is possible. A heat input of 5-38 kJ/in. should be used for SMAW or GTAW. A heat input of about 50kJ/in. can be used for SAW.

Send Enquiry

 

Stainless Steel Pipes Tubes
Stainless Steel SS Seamless Pipe
Stainless Steel SS Seamless Tube
Stainless Steel SS Welded Pipe
Stainless Steel SS Saw Pipe Tube
Stainless Steel SS Round Pipe Tube
Stainless Steel SS Dom Pipe Tube
Stainless Steel SS Erw Pipe Tube
Stainless Steel SS Line Pipe Tube
Stainless Steel SS Hollow Pipe Tube

ASTM / ASME SA 312 GR. TP 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.

ASTM / ASME SA 358 CL 1 & CL 3 GR . 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 321, 321H, 47.

 
Duplex Steel Pipes And Tubes
Duplex Steel Pipes Tubes
Duplex Steel Seamless Pipe
Duplex Steel Seamless Tube
Duplex Steel Welded Pipe Tube
Duplex Steel Saw Pipe Tube
Duplex Steel Round Pipe Tube
Duplex Steel Dom Pipe Tube
Duplex Steel Erw Pipe Tube
Duplex Steel Line Pipe Tube
Duplex Steel Hollow Pipe Tube

ASTM / ASME SA 790 UNS NO S 31803, S 32205, S 32550, S 32750, S 32760.

PRODUCTS LIST :
  • Seamless Pipes Tubes Tubing
  • Dom Pipes Tubes Tubing
  • Saw Pipes Tubes Tubing
  • Line Pipes Tubes Tubing
  • Hollow Pipes Tubes Tubing
  • Rectangular Pipes Tubes Tubing
  • Round Pipes Tubes Tubing
  • Square Pipes Tubes Tubing
  • Water Pipes Tubes Tubing
  • Steel Casing Pipes Tubes Tubing
  • Sewage Pipes Tubes Tubing
  • Structural Steel Pipes Tubes Tubing
  • Industrial Steel Pipes Tubes Tubing
  • Steel Scaffolding Pipes Tubes Tubing
  • Oil & Gas Pipes Tubes Tubing
  • Erw Pipes Tubes Tubing
  • Ibr Pipes Tubes Tubing
  • Boiler Pipes Tubes Tubing
  • Saw Pipes Tubes Tubing
  • Welded Pipes Tubes Tubing
  • Rectangular Pipes Tubes Tubing
  • Square Pipes Tubes Tubing
  • Fabricated Pipes Tubes Tubing
  • Galvanized Pipes Tubes Tubing
  • Coating Pipes Tubes Tubing
  • Large Diameter Pipes Tubes Tubing
  • Nace Pipes Tubes Tubing
  • Low Alloy Steel Pipes Tubes Tubing
  • Polish Pipes Tubes Tubing
  • Alloy 20 Pipes Tubes Tubing
  • Monel Pipes Tubes Tubing
  • Inconel Pipes Tubes Tubing
  • Nickel Pipes Tubes Tubing
  • Cupro Nickel Pipes Tubes Tubing
  • Hastelloy Pipes Tubes Tubing
  • Mild Steel Pipes Tubes Tubing
  • Titanium Pipes Tubes Tubing
  • Ss Stainless Steel Pipes Tubes Tubing
  • Brass Pipes Tubes Tubing
  • Copper Pipes Tubes Tubing
  • Cast Iron Carbon Steel Pipes Tubes Tubing
  • Low Temperature Carbon Steel Pipes Tubes Tubing
  • Carbon Steel Pipes Tubes Tubing
  • Nickel Alloy Pipes Tubes Tubing
  • Nickel Pipes Tubes Tubing
  • Copper Nickel Pipes Tubes Tubing
  • Alloy Steel Pipes Tubes Tubing
  • Super Duplex Steel Pipes Tubes Tubing
  • Duplex Steel Pipes Tubes Tubing
 
Send Enquiry
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
 
UNS 32750 Duplex Stainless Steel Pipes Tubes Tubing
   

Home | About Us | Products | Quality | Inquiry Form | Contact  

exporter of all UNS 32750 Duplex Stainless Steel Pipes Tubes | Suppliers UNS 32750 Duplex Stainless Steel Pipes Tubes Exporters Traders and Manufacturers of Seamless Welded Erw Fabricated Pipes Tubes Tubing India